דרושים בתל אביב- משרות פנויות באלקטרוניקה וחשמל

We are looking for a RT embedded engineer and develop our R&D teams.
We create business-friendly IoT platforms that empower service providers to delight their end-users and provide valuable services.

• Electrical\Computer Science\Software engineer.
• At least 5 years' experience in design, development and programming of RT Embedded solutions using C
• Experience with RTOS - Must
• Hands-on experience in development and troubleshooting on embedded microcontrollers and Processors.
• Proven working experience with embedded SW development (preferably on Cortex-M targets) and its fundamental peripheries (ADC, I2C, SPI, UART, etc.
• Proficient using C and C in embedded applications.

Our System & Validation team is looking for an experienced Board Design/FPGA Engineer, with strong capabilities throughout the entire FPGA development process.
The job includes leading development of high quality FPGA designs, for Chips’ Pre-Silicon validation, and developing chip functionality tests which incorporates HW modules and embedded FW.

-Bsc. in Electrical Engineering from leading university with More than 3 years of experience
-Experience in Board Design - Must
-Knowledge in Verilog/VHDL - Must
-Experience with Altera or Xilinx flow, including design entry, synthesis, place & route, timing.

We are looking for an FPGA Engineer to join our Development team and will work closely with the Software and QA teams.
Key responsibilities:
- Modifying existing FPGA designs to add features and enhance functionality
- Prepare FPGA architectural designs and documentation
- FPGA design and implementation
- FPGA design verification

Lead failure analysis processes for company's products.
 Determine root cause for failures under investigation and implement corrective actions.

" B.Sc. in electrical engineering from a leading university.
" At least 2 years of experience in Board design
" Experience in Digial/Analog/RF design.
" Experience with lab equipment (Oscilloscope, DVM, Signal generator, Spectrum analyzer, LCR meters, etc.)
" Must possess excellent skills in problem-solving, self-learning, presentation and teamwork.
" Good verbal and written communication (English

B.Sc./M.Sc./Ph.D. in Electrical Engineering from a recognized university.
5 years of experience in analog or mixed-signal design, simulation and testing techniques.
Building blocks at least one of the following: OPAMPs, Gm-C filters, switched capacitors, ADCs, DACs, bandgaps.
Laboratory measurement skills (analog and digital).

Familiar with frequency synthesis: phase detectors, oscillators, LC-VCOs & PLLs.
Familiar with High-speed analog/mixed-signal circuit design technique.
Familiar with layout verification tools (Calibre, PVS).
Experienced in high-level scripting languages (e.g. Python, TCL, Perl).
Strong knowledge of MOS, Bipolar transistors and CMOS fabrication processes
Integrated power conversion circuits such as DC-DC, charge-pumps, rectifiers, LDO’s and power amplifiers.
Knowledge of high voltage IC processes (e.g. BCD, SOI).

" Investigate Technical Support issues being escalated from Tier 3 support
" Work with R&D on critical field issues investigation and debug
" Work on debug process of multidisciplinary systems that include Linux embedded, Micro controllers, Cloud based monitoring system and SMPS (switch mode power supply) HW
" Provide product training for the support organization
" Responsible for escalating technical issues that could not be resolved by Tier 3 Engineers, Product Development and Software Development
" Work continuously to increase Support Engineers product knowledge by reviewing escalated cases

 a degree in Electrical Engineering or experienced practical electrical engineer
" Experience utilizing debugging tools and lab simulations to analyze problems and identify solutions
" Basic knowledge in SMPS (switch mode power supply), AC/DC and DC/DC converters
" Ability to logically troubleshoot software issues to determine the root cause and present suggested work-around and solutions
" Ability to investigate, analyze and understand complicated system issues
Other skills:
" Ability to demonstrate strong analytical and problem solving skills
" Excellent written communication and verbal skills, as well as strong listening skills
" Ability to handle multiple priorities
" Must speak fluent English
" Perform in an effective and timely manner all the tasks required
" Exhibit above average reasoning ability by clearly defining problems, analyzing data, establishing facts and drawing valid conclusions

" Implement complex logic as signal and image processing algorithms in High end FPGA
" Develop high-speed and high-power Boards, both analog and digital with low level software development and debugging of embedded devices (e.g. FPGA's)
" Define and design electrical and electronic components to meet system requirements and schedule
" Analyze failures and investigate performance in a multi-disciplinary system
" Participate and lead various DFM and DFX programs to improve overall electrical sub-system and full system reliability and manufacturability

" B.Sc. in electrical engineering, M.Sc. - an advantage
" A minimum of 7 years' experience in similar positions in the multi-disciplinary capital equipment industry
" Experience and familiarity with digital and analog design, camera electronics and circuit board design
" Strong knowledge of VHDL (preferred) or Verilog; simulation and verification tools
" Strong experience with FPGA design flow; Altera/Xilinx design software;
" Familiar with high-speed communication standards such as SPI, GigE, PCIe, USB, etc.
" Experience in developing electrical systems based on a distributed architecture - and advantage
" Experience in typical business processes, ECR's, ECO's, PLC, design reviews, etc.
" Experience with CCD and CMOS camera imaging technology and relevant communication standards
" Proficient in use of standard electrical test equipment, logic analyzers, function generators, oscilloscopes, etc.
" Ability to understand and troubleshoot complex opto-electromechanical systems
" Strong communication & presentation skills
" Self-motivated and success-driven team player
" Proficiency in English

Programming machine PLC's in structure text and develop machine vision
" Work closely with different interfaces such as mechanics, software and electrical engineers to assure proper machine function.
" Apply a high level of initiative understanding overall system objectives and proactively seek solutions to potential technical challenges.

B.Sc. in Mechanical Engineering or Electronic Engineering/ Computer Engineering
" At least 3 years' experience programming PLC in structure text
" Experience in writing applications (machine sequence, protocols, GUI, etc.)
" Experience in interfacing various products (Robotics, Motors, Pneumatic, Sensors, Test equipment, Machine Vision, etc.).
" Proven experience in Beckhoff PLC's - a must
" Ladder programming- an advantage
" Experience with machines vision- an advantage